Very simply, pickling is an acid bath process to remove the unusable iron oxide scale that forms on hot worked steels as well as other impurities (you may know iron oxide as rust, but there are actually at least 15 other known allotropes of iron oxide). When steels are hot worked, above their recrystallization temperature, oxygen will react with the outside layer of iron and produce a flaky layer of scale. This layer makes the steel difficult to work with and paint.

Why is it Called Pickling?

The pickling process involves dipping the metal into a solution to remove surface impurities. The solution used is called pickle liquor and hence the process of dipping the metal into the pickle liquor became known as pickling.

See more : Zinc Aluminum-Magnesium Coated Steel

How is Steel Pickled?

Hot worked steel is dipped into a vat of either sulfuric or hydrochloric acid, called pickle liquor. Steels with carbon content higher than 6% will require an extra step using nitric, phosphoric, or hydrofluoric acid. The metal is dipped into the bath for a preset amount of time, to avoid too much of the metal being eaten up by the acid. The amount of scale typically removed is between 1% and 3% of the mass of the steel.

hoa sen steel vietnam

Once the metal is out of the bath, it gets rinsed and is ready to continue its processing. Usually at this point it is ready for cold working. The left-over pickling liquor, now filled with rust flakes and iron scale, is called pickling sludge. Often considered an environmental hazard, it is sometimes neutralized with a base (usually lime) and then thrown away. Systems exist also to recover some remaining useful products from the sludge, including hydrochloric acid and ferric oxide. There are processes that use waste mill scale too. The scale can be sent to a sintering plant where the iron oxide dust and flakes can be reformed into a solid mass of steel.

Alternatives to Pickling

Smooth clean surface (SPS) is a mechanical method of removing scale. As the (usually sheet) steel passes through a series of rollers, abrasive brushes scrape the scale off the metal. This method removes scale without the use of water and oils.

Flame cleaning is a simple process that uses an oxyacetylene flame to remove the surface of a metal, usually structural steel. A regular oxy torch can be used with the flame drastically reduced to avoid digging too deep into the metal.

If you want to import GOOD QUALITY slitted Steel coil from Vietnam, please contact us at:

– Email:
– Mobile/Whatsapp/Wechat/Line/Viber: +84 973 765 730
– Website:

Top VietNam Steel manufacturers I Slitted Steel coil manufacturers I Steel  manufacturers & suppliers